Compliance
Compliance that stands up when someone checks.
A failed audit, a halted job, a rejected weld or an awkward HSE visit. We test, inspect and certify welding equipment and workshops, and give you the paperwork to prove it.
Six services
Everything an inspector asks about in a welding workshop.
Booked together, done in one visit, certified per asset and held in OneArc.
At a glance
What's tested, to what, and how often.
| Service | Standard or regulation | Typical interval | You get |
|---|---|---|---|
| Calibration and validation | BS EN IEC 60974-14 | Annual | Certificate and sticker per machine |
| Periodic inspection | BS EN IEC 60974-4 | Annual | Inspection certificate per machine |
| LEV examination | COSHH Reg. 9 / HSG258 | At least every 14 months | Statutory TExT report |
| Gas equipment | BCGA CP7 / CP47 | Based on use, often annual | Inspection record per item |
| RPE and PAPR | COSHH / HSG53 | At least monthly, or 3-monthly if used occasionally | Examination record per unit |
| PAT testing | Electricity at Work Regs 1989 | Based on use and environment | Labels and a register |
Intervals are typical. Your risk assessment, quality system or insurer may set something different, and we work to that. Who's qualified to do each test? Qualifications and competence.
Not sure where you stand?
Find out for free.
We'll visit your site and check calibration, periodic inspection, LEV, RPE, gas equipment and PAT against current regulations. You'll know where you're covered, where you're exposed and what needs doing first.
Free site audit
One visit. Every test. One set of paperwork.
Tell us what's on your floor and we'll put a visit together. Or start with the free audit if you're not sure what's due.